Advice needed for controller box layout

[JAZZCNC]

Im glad you said that about the safety relays, I can see the importance of them but that will only complicate my build at this stage.

Sorry but Jim is WRONG to say it's not needed it very much is and it's not complicated or expensive.!!

[Bustercnc]

Understood Jim, I thought the estop button was hard wired but now I think about it, its only configured as such in the software and can be over ridden. I will be sure to add this along with fuses.

I did consider getting the next case up from mine but just wanted to keep it compact and simple as its just for PCB work with a cutting area of 200x150

My head hurts now , think Im going to just put my feet up now and enjoy a beer and probably google the stuffing out of this.

I really appreciate all the comments so far.

Cheers Dave

[Gotty101]

Don't worry just take your time and it will come together. The estops circuit must work no matter what, it must work in a normally closed setup, so if for some reason the wiring fails on it, it will estops. Read other threads where they show schematics and you will see what they are doing, but if your not sure ask and people will help.

With mine I've made a pcb (for ease of wiring and space reasons) that handles the alarms from the drives, limits switches and controls the safety relay. The whole thing is wired very defensive, so if there is a faulty connection it estops for safety. The way to think is one day (hopefully not) you may need that estops button to work and you want to be 101% sure it's going to work when you really need it.

[cncJim]

If my previous post gave the impression that a hardware safety circuit is not needed and software is fine, then I apologise. That was not what I intended.

Trev - Your box looks great. Do you have any details of you custom PCB you made? I am interested as I am designing a fail safe circuit right now based on the sample one from the Mach3 manual and EddyCurrent's build thread (http://www.mycncuk.com/threads/6565-Ready-Steady-Eddy).

Cheers,
Jim

[Bustercnc]

If my previous post gave the impression that a hardware safety circuit is not needed and software is fine, then I apologise. That was not what I intended.

Cheers,
Jim

No worries Jim, I have a AMA25LV Mill which I converted myself a couple of years back. I am ashamed to say I neglected any such failsafe features there as well and opted for "Strategy 1". Lesson learned, I will correct this when/if I ever get it set up again.

Trev - Your box looks great. Do you have any details of you custom PCB you made? I am interested as I am designing a fail safe circuit right now based on the sample one from the Mach3 manual and EddyCurrent's build thread (http://www.mycncuk.com/threads/6565-Ready-Steady-Eddy).

Hi Trev, I would be interested in seeing the circuit diagarm for your custom PCB if possible.

Good luck with your move, sounds ilke you are in the same boat as me, although I moved out 6 months ago and still not in my new house. Yellowbox storage are charging me a fortune. Yep, I read your thread from start to finish last night.

Cheers
Dave.

[Gotty101]

No worries Jim, I have a AMA25LV Mill which I converted myself a couple of years back. I am ashamed to say I neglected any such failsafe features there as well and opted for "Strategy 1". Lesson learned, I will correct this when/if I ever get it set up again.





Hi Trev, I would be interested in seeing the circuit diagarm for your custom PCB if possible.

Good luck with your move, sounds ilke you are in the same boat as me, although I moved out 6 months ago and still not in my new house. Yellowbox storage are charging me a fortune. Yep, I read your thread from start to finish last night.

Cheers
Dave.

Hello both. Sorry ive not got back to you, last weekend i moved out of my old house and im currently at my girlfriends. with regards to the circuit diagram ive not got it to hand at the mo as my cad/main pc is in bits in storage. Although if you have any questions ill try and help out as best as i can.

Trev