Advice on New Robocutters X4

[Clive S]

Ok, so how would one go about building a plan/parts list for a 'good' CNC - are there open source plans or 'quality' components lists on this forum or folk who might share standard builds? Not wildly fussed about size either BTW, just most forums appear to be saying go as big as you can without sacrificing quality as it gives more scope.

There are plenty of build logs on this forum some with cad models and it is OK to copy anybody's plans or modify them as you wish. Remember the bigger you go the more expensive and generally harder to get accurate.

At the end of the day the choice is yours but you will find loads of info and help here even if it might not be what you want to hear. Start by looking through the build logs and then put some plans up for others to chime in. Good luck with your build.
edit here is a link to some logs http://www.mycncuk.com/forums/253-DIY-Router-Build-Logs