Thread: Aluminium profile cnc build
Hybrid View
-
Is your measurement just to the end of the key in the shaft?
http://cnc4you.co.uk/resources/Stepp...1B%203.1Nm.pdfLast edited by Clive S; 21-07-2016 at 11:10 PM.
..Clive
The more you know, The better you know, How little you know
-
22-07-2016 #2
My motor shafts don't go all the way through the pulley and have been running fine for years.
If it is more than half way into the pulley and the grub screws have a good lock onto the shaft I don't see any major problems.
-
22-07-2016 #3
Just looked at my Z axis and it looks a little like this.....
Shaft is 3/4 the way in the pulley and held on with 2 off M3 grub screws @ 90° to each other...
Plate thickness is 3mm so 17mm pocket machined out the plate.Last edited by njhussey; 22-07-2016 at 12:23 PM.
-
22-07-2016 #4
So do we actually need that thickness of a plate if anyway we are machining almost all the through the thickness?
Išsiųsta naudojantis SM-G900F Tapatalk 4 Lt
-
22-07-2016 #5
It has to have some inherent stiffness to stop any bending forces from the belt, I had it 20mm thick as it came out the same sheet as the rest and I needed the thickness to put the M8 bolts into....
-
22-07-2016 #6
So in my case i have it 10mm and attaching it to the other plate with M6 screws. Is that allright?
Išsiųsta naudojantis SM-G900F Tapatalk 4 Lt
-
25-07-2016 #7
Is there any chance that somehow i have blocked my posts, so others cant see it? The same with massages? Or people just doesnt respond as much as i would like? :D
Išsiųsta naudojantis SM-G900F Tapatalk 4 Lt
-
-
25-07-2016 #9
-
25-07-2016 #10
In which point you would need more details? Just let me know. I tried to give screenshots of every important point, but if there is something you would like to see i can put them in here.
How about the whole frame structure, z axis and things like that?
Išsiųsta naudojantis SM-G900F Tapatalk 4 Lt
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Aluminium Profile - ValuFrame?
By Tenson in forum Marketplace DiscussionReplies: 12Last Post: 24-09-2020, 07:21 PM -
Aluminium Profile
By amxen in forum Metalwork DiscussionReplies: 2Last Post: 13-08-2015, 07:37 PM -
eBay: KB Aluminium Profile Supplies
By KB Aluminium in forum Items On eBay UKReplies: 45Last Post: 20-05-2015, 03:46 PM -
aluminium profile for cutting bed of router
By steeplejack in forum Marketplace DiscussionReplies: 3Last Post: 19-10-2013, 10:52 PM -
Tapping Aluminium profile
By jonbabbz in forum Tool & Tooling TechnologyReplies: 3Last Post: 28-05-2012, 08:09 AM
Bookmarks