Mini Lathe alignment

[irving2008]

I recently aquired a new mini lathe (7x14) and have been unable to align the tailstock (new type with 4 grub screws).
Tom suggested I check the headstock alignment.
Any suggestions on how to do this:question:
Thanks
Ed

Google is your friend.... here is a selection...
http://www.gadgetbuilder.com/Lathe_Align.html
http://www.wrathall.com/Interests/ma...20accuracy.pdf (old and general but useful - I used this on my old-timer)
http://www.mini-lathe.com/Mini_lathe/Tuning/tuning.htm