Thread: boxford duet
-
18-01-2016 #1
Boxford duet cnc mill/ lathe, ex school so in exhalant condition as you would expect from a little used machine. Comes with computer loaded with original cad cam software, boot up disk, and a spare hard drive pre-loaded with software. It’s all in full working order and comes with a six station tool holder, milling table and rotating tailstock. Only selling to fund new cnc project
Info From boxford Site.
Technical Specification
Swing Over Bed 225mm (Lathe)
Axis Travel (X x Z) 125mm x 360mm (Lathe)
125mm x 75mm (Mill)
Spindle Speed 200 - 2500rpm
Feed Rate 1500mm/min
Table Size Mill 180mm x 110mm
Spindle Bore to Pass 20mm
£900.00Last edited by reelman; 19-01-2016 at 06:51 PM.
-
13-02-2016 #2
Hi Gordon, Just been on paletline for a quote they want £98.40. personally I would prefer to meet you half way that way I know it's not been dropped are damaged. Theirs a Manuel in pdf form. if you want to discus you can phone me on 07704802620
regards Tony
-
14-02-2016 #3
you should be able to get a pallet delivered for around £50.
Try these. http://www.nationalpallets.co.uk/
-
14-02-2016 #4
Hi Gordon, I'm located at WN2 5XT don't know about Insurance but if your serious I'll look into it for you. Just looked at national pallet and it says its insured and its cheaper or you can sort your own courier if you wish.
Tony.Last edited by reelman; 15-02-2016 at 12:18 AM.
-
14-02-2016 #5
you can pick up a pallet on any industrial estate, just pop in any wholesalers or supplies companies and they will gladly let you take a pallet
-
15-02-2016 #6
-
15-02-2016 #7
-
25-02-2016 #8
Hi Gordon, are you paying by paypal gift
-
05-09-2016 #9
this is now SOLD
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
FOR SALE: Boxford Mark 1 Duet for sale
By torrington in forum Items For SaleReplies: 9Last Post: 23-07-2017, 09:31 PM -
Boxford 165 HMC
By uli12us in forum Boxford Vertical MillsReplies: 48Last Post: 24-01-2016, 08:21 PM -
WANTED: Looking for a MKII Boxford duet for conversion to Mach 3
By BlueBot in forum Items WantedReplies: 0Last Post: 20-05-2014, 06:07 PM -
FOR SALE: Boxford duet for sale - no software-
By FarrerDesign in forum Items For SaleReplies: 1Last Post: 13-06-2013, 05:41 PM -
FOR SALE: Boxford Duet CNC Mill/Lathe in 1. No software
By FarrerDesign in forum Items For SaleReplies: 0Last Post: 02-02-2013, 07:12 PM
Bookmarks