Need Help! Gerber System 48 Build Issues Video and Pictures Inside!

[toby]

New Update.
I've designed a piece for a family member's wedding and this will be the first g code I created with aspire vectric. Also the first thing i have attempted to cut with the machine. I loaded the code and started the cycle but what I found was a stuttering and strain on the y and especially x axis when making small movements. The z was going up and down like a dream but this is on a screw where the x and y are on belts.

I lowered the velocity and speed but this made it worse. Ive uploaded two videos at the different speeds at 1000v and 300a and then half of this on youtube the stuttering gets worse towards the end of the video. Also below I have uploaded the code created by aspire and some screenshots of the axis on mach screen.

https://www.youtube.com/watch?v=QjiC_srqoO4

https://www.youtube.com/watch?v=4AXxvEFkOA4

The step motors are all set at 1600

Thankyou for any help



Attachment 19012Attachment 19013Attachment 19014Attachment 19015Attachment 19016