Quote Originally Posted by Chillimonster View Post
As titled,

Got a limited budget of £1500 to build a machine.

Ideally i'd like 800 x 600 cut area, but slightly larger is not an issue (But not too much due to space)

Mainly cutting MDF (12mm and 18mm) and plexi occasionally.

Already have a Kress 1050 spindle, Mach 3 with Licence, and the required PC

Whats the best way forward on this?

Thanks in advance.
Hi, welcome to the forum!!

Yes it is possible is the short answer!! How good are your DIY skills? What equipment do you have or have access to?