& todays random 'wet behind the ears' questions are....

[audioandy]

Hi Hank

I have a BWF 40E, I have just purchased a VFD and water cooled spindle so at the moment in the process of rebuilding my machine.
I have not used the Proxon in anger, if you go to my build thread there is a video of mine pocketing out some MDF,might give you a better idea.

Andy

[HankMcSpank]

Hi Hank

I have a BWF 40E, I have just purchased a VFD and water cooled spindle so at the moment in the process of rebuilding my machine.
I have not used the Proxon in anger, if you go to my build thread there is a video of mine pocketing out some MDF,might give you a better idea.

Andy

I'm a little puzzled with your videos. You bought a VFD spindle & then posted up a virtually silent CNC machine doing it's stuff!

[ame="http://www.mycncuk.com/forums/showpost.php?p=5675&postcount=25"]MYCNCUK - View Single Post - Machine Build My Build[/ame]

Is that the Proxxon *or* is that the VFD Spindle? (I can';t believe how quiet that is! - like astoundingly quiet ...very anti-ASBO ish)

You say you've not used it in anger...do you mean, not used it much or not used it at all). I just wanted to canvass your opinion on whether it seems like quailty. I think I read somewhere there are problems with the Proxon not have a standard collet ...has this hampered you?

Also, if you've upgraded...do you wanna sell me the proxxon?!!