& todays random 'wet behind the ears' questions are....

[audioandy]

Hi Hank

The video showing the MDF being cut is the Proxon not the spindle.

The Proxon was one of the first things I purchased when I first started with this CNC bug!
but the machine I have built is much bigger than I first planned and the Proxon is dwarfed, so thats why I decided to buy the 3HP spindle.

When I say its not been used in anger, all I have done with it is the MDF in the video and some engraving thats it.

The build of it feels good and I was very pleased with the engraving I did,if you are serious about getting one, you are more than welcome to borrow this one (I have the clamps for it) and try it to see if it will do what you intend to use it for.

Regards

Andy

[HankMcSpank]

Hi Hank

The video showing the MDF being cut is the Proxon not the spindle.

The Proxon was one of the first things I purchased when I first started with this CNC bug!
but the machine I have built is much bigger than I first planned and the Proxon is dwarfed, so thats why I decided to buy the 3HP spindle.

When I say its not been used in anger, all I have done with it is the MDF in the video and some engraving thats it.

The build of it feels good and I was very pleased with the engraving I did,if you are serious about getting one, you are more than welcome to borrow this one (I have the clamps for it) and try it to see if it will do what you intend to use it for.

Regards

Andy

Andy what a marvellous offer (& very trusting of you to!).

I'll drop you a PM.