CNC Project - Guitar Neck (and the rest if I can get away with it)

[njhussey]

Looking good Chris, following this with great interest...

[Washout]

Looking good Chris, following this with great interest...

Thanks Neil,

Looks like there might be a bit of a gap in videos for this project, as I'm stuck whilst waiting for deliveries of both hardware to make sure the body routes and drilling is correct and some acrylic glue for the neck binding.

Luckily there's plenty of other projects to do...

[Washout]

Part 7 - no CNC in this video due to binding the necks, but that will resume for the next two videos to come:

[Washout]

Part 8 is up in 2 videos - 8a is a walkthrough of Fusion 360 end to end and 8b is the machining:

[suesi34e]

Part 8 is up in 2 videos - 8a is a walkthrough of Fusion 360 end to end and 8b is the machining:

As ever a great video from you. Yours are up there with the ones I most like to watch on YT.

Many thanks

Steve

[JAZZCNC]

Doing great work Washout but let your machine and cutters have there head. This killing me It's like watching a thoroughbred horse being used for Donkey on beach.!! . . . It's cruelty to Machines.

Turn up the feeds watch your cycle times drop, tool ife increase and finish get better.!

[Washout]

Thanks Steve for the kind words.

Lol Dean - eloquently put sir and point taken :) I must knuckle down at some point and try some deeper/faster test cuts in aluminium and find out where my limits are for adaptive clearing - I have a couple of projects coming up this year that will need them e.g. rudder pedals for the gaming cockpit for one.

[suesi34e]

Washout, your welcome. I will look forward to more great videos I like that you use Fushion 360 and that you don't skip through what you do at 100mph. That is handy for me as I am keen on learning Fushion. I can see you put a lot of effort into the videos. I just have to find the time to get going learning Fushion and starting my build!