CNC Project - Guitar Neck (and the rest if I can get away with it)

[Washout]

Interesting watch but knowing nothing about musical instruments and only able to play a CD or Ipod not many comments I can make, nice work though would get more comments if people knew more about process.

Good point lucan07 and thanks for the feedback - I may try and inject some "anatomy of a guitar" into future videos - probably during the Andy Summers Telecaster project I am thinking about, as the build process will be very similar to the three guitars I have going.

[njhussey]

....Andy Summers Telecaster project I am thinking about.....

looking forward to this Chris, as you know I also want to make a Tele, I've got a few files of body and neck shapes but have looked no further than that as of yet as I'm still trying to make my RC plane!!

[Washout]

looking forward to this Chris, as you know I also want to make a Tele, I've got a few files of body and neck shapes but have looked no further than that as of yet as I'm still trying to make my RC plane!!

Yeah me too - I've wanted that guitar since 1978/9, but wasn't going to shell out the ~£10,000 Fender wanted for the limited edition replica in 2007.

Perhaps when the time comes (we both have projects to finish :) ) we could do a collaboration video as your machine's larger bed would save a lot of grief when it comes to cutting out the bodies.

[njhussey]

Yeah me too - I've wanted that guitar since 1978/9, but wasn't going to shell out the ~£10,000 Fender wanted for the limited edition replica in 2007.

Perhaps when the time comes (we both have projects to finish :) ) we could do a collaboration video as your machine's larger bed would save a lot of grief when it comes to cutting out the bodies.

Definitely up for that Chris, will have to have a play with Fusion 360 before that and finish off the CNC Router build and get it up vertical as it's a PITA having it on the floor!!!!!

[cropwell]

No doubt you have seen this guys work, but here it is for other forum members to be amazed at !

http://www.carverdoug.com/guitars.html

Cheers,

Rob

I wish I had your skill and patience Chris - I would love to build a Harpejji.

[Washout]

Hi Rob

Yes I have seen those guitars - they're really nice.

That Harpejji looks interesting and looks to be more 2D than a Fender design so should be doable if you can find a design/blueprint somewhere.

Chris

[cropwell]

Hi Rob

Yes I have seen those guitars - they're really nice.

That Harpejji looks interesting and looks to be more 2D than a Fender design so should be doable if you can find a design/blueprint somewhere.

Chris

The Harpejji board should be simple on a CNC router, it is just a matter of getting the fret distances right. The formula is something like 1/17 of the remaining distance to the bridge (but I would check it out properly). Electronics are more of a problem, I think you will need a sustain circuit for each string and that, in turn, means individual pick-up coils. The Chapman Stick works on a similar principle.

Cheers

Rob

[Wal]

Perhaps when the time comes (we both have projects to finish :) ) we could do a collaboration video as your machine's larger bed would save a lot of grief when it comes to cutting out the bodies.

Another cool build. Looking forward to that one taking shape..!

Wal.

[Washout]

Morning chaps,

More progress - nitro lacquer going on in this vid i.e. colour at last: