CNC Project - Guitar Neck (and the rest if I can get away with it)

**Washout** · 28-02-2016

Thanks Steve for the kind words.

Lol Dean - eloquently put sir and point taken :) I must knuckle down at some point and try some deeper/faster test cuts in aluminium and find out where my limits are for adaptive clearing - I have a couple of projects coming up this year that will need them e.g. rudder pedals for the gaming cockpit for one.

**suesi34e** · 28-02-2016

Washout, your welcome. I will look forward to more great videos I like that you use Fushion 360 and that you don't skip through what you do at 100mph. That is handy for me as I am keen on learning Fushion. I can see you put a lot of effort into the videos. I just have to find the time to get going learning Fushion and starting my build!

**Washout** · 04-03-2016

Part 9 is up with some "mild" CNC work to make a profile sanding block and then some manual labour:

**JAZZCNC** · 04-03-2016

More Torture to tooling.!! . . . . . . . I'm going to report you to RSPT. . . . Your running HSS feeds & speeds with Carbide tooling. It's criminal and Silly because your causing excess wear and lesser finish quality.!! . . .. Stop being a Pussy and turn up the wick.

**Washout** · 04-03-2016

Apologies Jazz, I knew I should have put a "Parental Guidance - Explicit Tickling CNC Content Contained" - you know for those of a more sensitive nature ;)

**Washout** · 29-03-2016

Hi all

No CNC in this video (that comes in the next video), but thought you might like to see where the necks have got to:

**Washout** · 11-04-2016

Hi all,

A couple of videos in the guitar series this week - the first not many people on here will want to view as its setting the machine up for machining, zeroing etc.

This one shows the actual machining (including a scary tool with a 50mm stick out):