CNC Project - Guitar Neck (and the rest if I can get away with it)

[cropwell]

Hi Rob

Yes I have seen those guitars - they're really nice.

That Harpejji looks interesting and looks to be more 2D than a Fender design so should be doable if you can find a design/blueprint somewhere.

Chris

The Harpejji board should be simple on a CNC router, it is just a matter of getting the fret distances right. The formula is something like 1/17 of the remaining distance to the bridge (but I would check it out properly). Electronics are more of a problem, I think you will need a sustain circuit for each string and that, in turn, means individual pick-up coils. The Chapman Stick works on a similar principle.

Cheers

Rob