. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 28-01-2016 #1
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Jacques View Post
    I am looking into the HIWIN Rails - and many people on the forum suggests 20mm because of grease, access to bearings etc. So I take it 20 is good,15mm bad ?
    No good or Bad about it really just 20mm are easier regards fitment etc but 15mm will still easily handle any forces.

    Quote Originally Posted by Jacques View Post
    The motors I am looking at can be 3mH if you couple them in series, 12mH in Parallel configuration.
    Think you may have got that wrong way round but if not then don't buy them.!! You want them wired in parallel and 12Mh is way too high.

    Quote Originally Posted by Jacques View Post
    Those drivers are nice, £100 nice - will have to save up for them....
    AM882 drives can be bought from Ali express for around £50-60. Also you can buy Hi-win rails from BST automation on Ali express much cheaper tyhan you'll find them in Uk.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

    Jacques
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  2. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  3. where to start?
    By trounce in forum Gantry/Router Machines & Building
    Replies: 44
    Last Post: 03-10-2011, 02:03 PM
  4. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules