. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 28-01-2016 #10
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 8 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 87 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Quote Originally Posted by Jacques View Post
    I am looking into the HIWIN Rails - and many people on the forum suggests 20mm because of grease, access to bearings etc. So I take it 20 is good,15mm bad ?

    The motors I am looking at can be 3mH if you couple them in series, 12mH in Parallel configuration.

    Those drivers are nice, £100 nice - will have to save up for them....

    Busy re-designing for the Linear Rails... will post new design within the next week.
    20mm is good because they are much easer to mount than the 15mm especially on the Z.

    Zapp motor are a good buy http://www.zappautomation.co.uk/elec...tor-48577.html
    or CNC4you as I suggested before https://www.cnc4you.co.uk/Stepper-Mo...s/Nema23-3.1Nm

    Drive about £53 http://www.aliexpress.com/store/prod...570168083.html or similar
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Clive S For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Where to start?
    By Inquisitor in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 27-11-2012, 02:35 PM
  2. where to start
    By martin54 in forum Gantry/Router Machines & Building
    Replies: 16
    Last Post: 22-09-2012, 11:29 AM
  3. where to start?
    By trounce in forum Gantry/Router Machines & Building
    Replies: 44
    Last Post: 03-10-2011, 02:03 PM
  4. is this 2.5d where do i start? help please if you can
    By h4ppy-chris in forum General Discussion
    Replies: 4
    Last Post: 29-03-2011, 12:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules