. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 10-01-2017 #1
    Tommy's Avatar
    Lives in Manchester, United Kingdom.
    Tommy
    Last Activity: 13-01-2017 Has been a member for 8-9 years. Has a total post count of 19.
    Quote Originally Posted by Chaz View Post
    Nice machine, virtually identical to mine but with slightly different electronics and placement for some items.

    Out of interest (ive changed my motors since and modified to Mach 3 via CS Labs), what is the highest feedrates you can get (X and Y) in mm/min, would you know or be able to check please?

    Free bump for a nice machine.

    Thanks
    Hi, Do you have “baldor D281 motion control card for a triac P. C. (denford), red 7-segment LED display type. The firmware is ESMINT 3.28 V1.6H/S - JD5.”
    Reply With Quote Reply With Quote
  2. 10-01-2017 #2
    andy_con's Avatar
    Lives in Essex, United Kingdom.
    andy_con
    Last Activity: 29-04-2024 Has been a member for 9-10 years. Has a total post count of 342. Received thanks 18 times, giving thanks to others 31 times.
    Quote Originally Posted by Tommy View Post
    Hi, Do you have “baldor D281 motion control card for a triac P. C. (denford), red 7-segment LED display type. The firmware is ESMINT 3.28 V1.6H/S - JD5.”
    Are you sure you have asked on the forum enough times?
    Reply With Quote Reply With Quote
  3. 10-01-2017 #3
    Chaz's Avatar
    Lives in Ickenham, West London, United Kingdom.
    Chaz
    Last Activity: 26-08-2025 Has a total post count of 1,654. Received thanks 115 times, giving thanks to others 71 times.
    Quote Originally Posted by andy_con View Post
    Are you sure you have asked on the forum enough times?
    I think he has posted in every Triac there there is. My email went mad with all the updates.

    Ill need to go through the stuff I have to check. Picture of the card will help me see if I have one.
    Reply With Quote Reply With Quote
  4. 11-01-2017 #4
    MrBurns's Avatar
    Lives in Manchester, United Kingdom.
    MrBurns
    Last Activity: 08-05-2017 Has been a member for 8-9 years. Has a total post count of 5.
    Hi, Interested in this, for some reason I can't send a PM. Could you drop me a message please ?
    Reply With Quote Reply With Quote
  5. 11-01-2017 #5
    Chaz's Avatar
    Lives in Ickenham, West London, United Kingdom.
    Chaz
    Last Activity: 26-08-2025 Has a total post count of 1,654. Received thanks 115 times, giving thanks to others 71 times.
    Quote Originally Posted by MrBurns View Post
    Hi, Interested in this, for some reason I can't send a PM. Could you drop me a message please ?
    Its an old post. Would be very surprised if still available.

    I may be selling my already retrofit Denford soonish however it wont be 'cheap' money as a lot has been spent on it already. Let me know if interested.
    Reply With Quote Reply With Quote
  6. 11-01-2017 #6
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 2 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 87 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Quote Originally Posted by MrBurns View Post
    Hi, Interested in this, for some reason I can't send a PM. Could you drop me a message please ?
    I think you may need one or two posts before you can PM Then Lee will enable it for you
    Last edited by Clive S; 11-01-2017 at 06:57 PM.
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote
  7. 11-01-2017 #7
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 2 Days Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 87 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Quote Originally Posted by MrBurns View Post
    Hi, Interested in this, for some reason I can't send a PM. Could you drop me a message please ?
    Do you want a triac or will a novamill do
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote
  8. 12-01-2017 #8
    Tommy's Avatar
    Lives in Manchester, United Kingdom.
    Tommy
    Last Activity: 13-01-2017 Has been a member for 8-9 years. Has a total post count of 19.
    Quote Originally Posted by Chaz View Post
    I think he has posted in every Triac there there is. My email went mad with all the updates.

    Ill need to go through the stuff I have to check. Picture of the card will help me see if I have one.
    My apologies for the numerous updates. I have attached the picture of the TRIAC control card. Cheers.

    Click image for larger version.  Name: Triac P. C. Card.jpg  Views: 259  Size: 367.3 KB  ID: 20336
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE: Denford Triac CNC PC
    By ricey3 in forum Items For Sale
    Replies: 6
    Last Post: 10-01-2017, 01:39 PM
  2. Denford Triac VMC
    By fidia in forum Milling Machines, Builds & Conversions
    Replies: 6
    Last Post: 19-08-2016, 08:18 AM
  3. FOR SALE: Denford Triac
    By asto in forum Items For Sale
    Replies: 19
    Last Post: 07-02-2016, 08:28 PM
  4. Help Denford triac p.c.
    By mikeulike in forum Denford Mills
    Replies: 3
    Last Post: 02-06-2015, 03:59 PM
  5. WANTED: Denford Triac
    By edwardsjc in forum Items Wanted
    Replies: 13
    Last Post: 20-08-2012, 08:17 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules