starting my bed frame this weekend

[mekanik]

Hi Ash
If you have a search of the forum there is at least one post that goes into some detail regarding the epoxy leveling method, giving good advise on trying to reduce inconsistencies in the level.
Mike

[Boyan Silyavski]

If you make a proper strong worktop there will be no need for sand.

[JAZZCNC]

If you make a proper strong worktop there will be no need for sand.

Sand has nothing to do with Strength it's to dampen resonance and no amount of sensible gusseting or bracing will beat sand at dampening resonance in steel tubes.

Is it required for large machine mostly cutting wood is Better question.? . . . .No is the answer IMO.