New milling motor Proxxon FBS 240/E upgrade to Kress 1050 FME-1

[Zynch175]

And I wouldn't worry about going for the smaller spindle. I doubt that many home-built machines can fully load the bigger spindle and the main reason for choosing the larger size is they usually take ER20 collets which allow up to 1/2" cutter shanks.

I went for the 1.5kW one, since the group buy has the 1.5kW or 2.2kW. And I decided that the new spindle is going on the new machine, that is in the process of designing (about 1000x1500 in size). It is going to be a modified frame of an embroidery machine, and the stepper motors and their drivers will also come from the machine. Once I get some drawings together I will post it to get an opinion on the design.

Poslano z mojega ONE A2003 z uporabo Tapatalk