. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 07-02-2016 #1
    ba99297's Avatar
    Lives in Thessaloniki, Greece.
    ba99297
    Last Activity: 19-12-2024 Has been a member for 9-10 years. Has a total post count of 141. Received thanks 3 times, giving thanks to others 1 times.
    The two 3m aluminum tubes one way or another i should had bought them for general measuring use
    Assuming that the extra cost is only the 500ml extra epoxy ( as for the above project will be needed 990ml), i will make a try
    I Know that the result will be disputed
    Of course i will use my straight edge against the epoxy surface to check the result
    Mean while any advice will be welcome.
    Thanks for your participation
    The creative adult, is the child who survived
    Reply With Quote Reply With Quote
  2. 07-02-2016 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Vagelis Personally I wouldn't waste the time or Money. You have decent length straight edge and using Technique Mekanik suggested will work for checking flatness of 1800 rails.
    Reply With Quote Reply With Quote
  3. 27-09-2019 #3
    Naftero's Avatar
    Lives in San Carlos de Bariloche, Argentina.
    Naftero
    Last Activity: 25-08-2021 Has been a member for 8-9 years. Has a total post count of 4. Received thanks 1 times, giving thanks to others 2 times.
    Did you made the straight edge?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: Aluminum profile and alu plate 1500mm x 600mm x 150mm working area, first cnc.
    By pierantoine in forum DIY Router Build Logs
    Replies: 36
    Last Post: 01-04-2017, 11:33 PM
  2. Low profile, compact work-holding solutions. Advice sought.
    By Wal in forum Tool & Tooling Technology
    Replies: 23
    Last Post: 26-08-2016, 10:45 PM
  3. Straight sections of box steel
    By gavztheouch in forum Metalwork Discussion
    Replies: 2
    Last Post: 03-01-2012, 02:37 PM
  4. can't cut straight or even drill straight, so need help
    By deannos in forum Machine Discussion
    Replies: 2
    Last Post: 02-10-2011, 05:35 PM
  5. Electronic edge finder: how do they work?
    By irving2008 in forum Probing, Digitizing & Scaning
    Replies: 14
    Last Post: 29-08-2009, 10:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules