. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 11-02-2016 #1
    JW1977's Avatar
    Lives in Vetlanda, Sweden.
    JW1977
    Last Activity: 25-06-2024 Has been a member for 9-10 years. Has a total post count of 85. Received thanks 2 times, giving thanks to others 22 times.
    Quote Originally Posted by Clive S View Post
    You will need one belt for the slaved axis with the IP-M If you want two motors slaved you will need http://www.zappautomation.co.uk/elec...-step-dir.html if I have linked correctly Jazz has had a lot of experience with all the CS lab stuff and it is tried and tested
    No belts! The IP-M can do slaved axis but it doesnt support the gantry geometry correction...
    As being mentioned in this thread that will have to be done in another way. A bit rough but well working apparently...
    Last edited by JW1977; 11-02-2016 at 04:05 PM.
    Reply With Quote Reply With Quote
  2. 11-02-2016 #2
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 2 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,342. Received thanks 618 times, giving thanks to others 82 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Quote Originally Posted by JW1977 View Post
    No belts! The IP-M can do slaved axis but it doesnt support the gantry geometry correction...
    As being mentioned in this thread that will have to be done in another way. A bit rough but well working apparently...
    So you are going with the hard stops route!!
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 6 users browsing this thread. (0 members and 6 guests)

Similar Threads

  1. Wiring Steppers to controllers
    By liamo1991 in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 05-09-2013, 01:58 AM
  2. PCI Motion Controllers
    By IanS1 in forum Motor Drivers & Controllers
    Replies: 0
    Last Post: 16-05-2013, 12:13 AM
  3. Difference between controllers and Cad/Cam programming???
    By 0625272 in forum Computer Software
    Replies: 0
    Last Post: 23-06-2011, 08:40 PM
  4. Programmable logic controllers
    By cncezee in forum Motor Drivers & Controllers
    Replies: 12
    Last Post: 15-11-2010, 08:44 PM
  5. FOR SALE: DC Motor controllers - 24v and 36v up to 160A
    By HiltonSteve in forum Items For Sale
    Replies: 10
    Last Post: 02-06-2009, 10:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules