Quote Originally Posted by reefy86 View Post
ahh yeah sorry i forgot about the position of the holes, as for the bottom 4 the reason why they are different is because the counterbore are on the opposite side. i do not have a dxf file as im new when it comes to drawing so that was actually my first drawing to show you guys lol.

cheers

Ash
Well then you have not said on the drawing which side is being countersunk. You have not mentioned 8.4mm only 8.1mm. If you say you want a hole for M8 it will probably end up at 6.8MM

So
1: Do you need 30mm ali
2: You don't need to say M8 just the hole size you want and whether it is through hole or to a depth
3: set all your measurements from two datum's ie bottom and one side.