Threaded View
-
14-03-2016 #26
Had a reply from CNC4YOU, they have tested all their stock of the SMPS i have and found 1 that has the same issue - at least I am not going mad.
They are sending out a replacement unit, 24v this time.
I have also borrowed enough bits to cobble together a 36v linear supply, if the new SMPS fails to sort the issue, I have that option ready to try.
Also ordered parts to make a full-power linear supply.
The radio interference is a false lead i think - i borrowed a FM/DAB portable last night and the signal is so weak in the shop that DAB was 100% dead and FM only just worked on Radio2 (which is all i use really, never bothered trying other stations so did not notice the massive lack of signal) So it may possibly be just caused by a very weak reception area. I'm ignoring this issue for now.Last edited by Davek0974; 14-03-2016 at 03:26 PM.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
BUILD LOG: First time build - Steel Frame CNC Router
By examorph in forum DIY Router Build LogsReplies: 144Last Post: 19-10-2023, 06:25 PM -
BUILD LOG: Well here goes... Aluminium frame router design
By CharlieRam in forum DIY Router Build LogsReplies: 186Last Post: 11-05-2020, 12:39 PM -
BUILD LOG: Steel frame cnc router design/build
By CraftyGeek in forum DIY Router Build LogsReplies: 110Last Post: 06-05-2015, 10:00 PM -
WANTED: CNC Mill/Router for Cutting Aluminium
By kylelnsn in forum Items WantedReplies: 5Last Post: 09-08-2012, 09:54 PM -
BUILD LOG: Aluminium Extrusion CNC Router Build
By joshendy in forum DIY Router Build LogsReplies: 9Last Post: 10-04-2012, 08:26 PM
Bookmarks