Quote Originally Posted by Davek0974 View Post
Did have a probing error though - setting up for engraving plastic, 0.2mm 30deg 3mm tool in, tested the touch-plate as i always do, pressed the Z-Ref button, tool comes down and just keeps on going - pushed that little carbide bit through the pcb touch-plate, through 3mm of engraving plastic and a couple of mm into the machine bed :(

By the time i had hit the e-stop, the stepper was stalling, no idea why, i rebooted and it was ok for the rest of the day.

Scary stuff.
Dave, I had the same thing happen to my touch plate, it's got a 3.175mm hole punched through it, the 18mm MDf base and into the Ali bed....mine was because the earth wire had become unattached. Just goes to show how much power these things have, wouldn't want my fingers (or anything else) in the way of it! Needless to say I watch the procedure like a hawk now with one hand on the 'o'shit button...just in case!