I would think it would be fine, Arc have a good reputation and Ketan the owner is well respected. If you can, go along to their showroom and have a look at the machine and talk to him about what you want to do. There's a very capable engineer called John Stevenson who works with Arc and has a lot of input to the machines they sell, they have a number of improvements compared to the generic X series. As I said above, if you went for this I'd get one with R8 spindle, the collets are cheap, hold well, don't get stuck, and with the cutter in a collet direct in the spindle you get more headroom and better rigidity.


Sent from my iPad using Tapatalk