. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 30-07-2018 #15
    Pontomira's Avatar
    Lives in Funchal, Portugal.
    Pontomira
    Last Activity: 02-08-2018 Has been a member for 6-7 years. Has a total post count of 4.
    Quote Originally Posted by artmin View Post
    It was an easy enough install but you will need to make mounts for the new spindle to attach to the HEIZ. This is my effort:

    Click image for larger version.  Name: IMG_20180726_191014-768x1024[1].jpg  Views: 2824  Size: 160.6 KB  ID: 24595

    It's the 1.5Kw water cooled spindle that I bought with the body dia. of 65mm. I used a standard LPT cable for LPT2 and built a separate control panel.

    Click image for larger version.  Name: IMG_20180726_190936-1040x780[1].jpg  Views: 2811  Size: 190.6 KB  ID: 24596

    I bought a long ribbon cable extension for the VFD control panel and I have a manual potentiometer that I can switch to if I want to overide the commands from WinPCNC. Also included is a temperature controller which controls 4 PC fans that are mounted on a van heater matrix and the water flow is supplied by a fish tank pump. That's the LPT2 cable that you can see and then the internal electronics are tapped from that.
    Well i've noticed that my Zero3 controller has an extra output, under LPT2, they don't have any documentation about it. Is it an output for the VFD?

    Click image for larger version.  Name: P_20180730_170630.jpg  Views: 2782  Size: 123.5 KB  ID: 24606
    Last edited by Pontomira; 02-08-2018 at 10:11 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Huanyung FVD PD002 not working
    By eurikain in forum General Electronics
    Replies: 7
    Last Post: 28-02-2016, 03:27 PM
  2. Has anyone had any issues on installing Fusion with Norton on a machine?
    By suesi34e in forum Fusion 360
    Replies: 2
    Last Post: 27-01-2016, 12:23 AM
  3. Installing Mach 3 is driving me mad!
    By tonygagey in forum Artsoft Mach (3 & 4)
    Replies: 16
    Last Post: 13-07-2015, 01:20 PM
  4. Reversed axis on a AXYZ 6010 after installing DNC controller software...
    By RickyThunders in forum Machine Control Software
    Replies: 1
    Last Post: 12-02-2013, 03:56 AM
  5. Installing Mitsubishi inverter FR-E520S-2.2K-EC
    By Colin Barron in forum Motor Drivers & Controllers
    Replies: 5
    Last Post: 25-09-2010, 07:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules