Thread: Thor, or should that be Zeus?
-
19-05-2016 #71
-
19-05-2016 #72
Have you seen drill tap machines like these? https://www.youtube.com/watch?v=-fcWdMVVbEs
Most have BT30 spindles at ~10,000 rpm
Cheers,
Fenza
-
20-05-2016 #73
-
20-05-2016 #74
Check out http://www.cells.com.tw/en/products.php?m_sn=6 I haven't used CELLS TEC but I believe they make good spindles, both motorised and non motorised.
Stuff like http://www.aliexpress.com/store/prod...643490383.html might be worth looking at.
Are you more interested in built in motor spindles?
Cheers,
Fenza
-
20-05-2016 #75
-
20-05-2016 #76
-
22-05-2016 #77
Started with the layout for the electrics. Ill mount onto a stainless plate most likely, this was just on MDF to get a feel for the size and get the basic X axis movement sorted.
A quick video, nothing is really calibrated but the motor seems happy to spin to 4000 rpm. Its a Panasonic 1.5KW motor and A4 drive powering it.
https://www.youtube.com/watch?v=Az4RkyfsDTE
-
29-05-2016 #78
A number of hours later, some marking, measuring, drilling, fitting, wiring and we have the bulk of the electronics mounted.
-
29-05-2016 #79
isn't that panel a bit tiny for your machine? don't you want more room in case you missed something
-
29-05-2016 #80
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks