Thor, or should that be Zeus?

[Chaz]

Hi Chaz
nice hear of your progress, can you give a detailed run through on the rail fixing process, am curios as to how this is done.
Regards
Mike

Will do. There is a run down earlier in this thread. Ill take pics and explain the process. Some of which I think I can improve in future but at least I have a flat surface I can work with.

[Chaz]

Putty done, levels look good. I am using a surface plate upside down as a table but also to get alignment of the ballscrew / mounts before I putty the level for the bearing holder.

[Chaz]

I am having some issues with the epoxy I ordered and its delaying my build.

Can anyone recommend an epoxy which is suitable to do hold things like nuts in place for where the rails get mounted etc?

Thanks

[mekanik]

Hi Chaz
This any good?
http://www.ebay.co.uk/itm/ANCHORSET-...8AAOSwq7JUGAUU
Mike

[Chaz]

Hi Chaz
This any good?
http://www.ebay.co.uk/itm/ANCHORSET-...8AAOSwq7JUGAUU
Mike

Thanks. Not sure.... anyone have experience of this? Google brings up loads of products however I dont want to pay school fees if someone knows what might work from previous experience. That said, £6.63 is worth a punt to try.

[Chaz]

I believe this should work. Sika are well regarded as far as I understand.

http://www.uksealants.co.uk/sika-anchorfix-1--p84.html

[Clive S]

Chaz I have used both of those in the past with great success. You will need to prepare all the hole first and blow any dust out. The nozzles on the tube are a duel flow type and in my experience cannot be used more than once so try and do the job at one sitting.

[Chaz]

Did you use the Red or Green Anchorset Clive?