Thor, or should that be Zeus?

[Chaz]

You sir are completely and utterly bonkers ;)

But a good kind of bonkers lol fascinating project looking forward to seeing her cutting.

Lol. Thanks.

I have good advice that I can supply once I am done. The one liner is, if you are thinking of making something like this, dont. If you are still thinking of it, dont, and still, dont.

That said, it can be done and there are many things I would do differently, not in terms of design etc, but the way that I work and what tools / stuff you need to make this happen.

[Robin Hewitt]

if you are thinking of making something like this, dont.

This is on such an epic scale it almost ranks with Noah's Ark.

I think it has to be finished, there has to be a conclusion, at least a video of it cutting. Something a futuristic Time Team can search the archive for when they recover this behemoth intact from the apocalyptic, London ruins

[Desertboy]

This is on such an epic scale it almost ranks with Noah's Ark.

I think it has to be finished, there has to be a conclusion, at least a video of it cutting. Something a futuristic Time Team can search the archive for when they recover this behemoth intact from the apocalyptic, London ruins

I want to see his concrete car ;) Still handles better than a yank lol.

[Chaz]

This is on such an epic scale it almost ranks with Noah's Ark.

I think it has to be finished, there has to be a conclusion, at least a video of it cutting. Something a futuristic Time Team can search the archive for when they recover this behemoth intact from the apocalyptic, London ruins

Ye, ignoring the cash spent, also keen to just see if it works.

Managed to get some of the Z axis completed today but I need a large mill to square everything and get this completed.

[Chaz]

A long shot, anyone near Uxbridge (I am willing to travel) that has a mill that I can use to get this Z Axis completed?

I need something that can do around 500 x 400 mm. I have access to a Bridgeport but no response from the person that offered. I just need to go around the rectangle and square up and do around 16 holes with some very basic code.

Thanks

[Desertboy]

Hi, I just read the whole thread from the beginning amazing work but I have one question where did you get your rails?


these are my carriages, look familiar lol trying to source the rail. Looking at yours I think I have the baby version (20mm rail)

[Chaz]

Hi, I just read the whole thread from the beginning amazing work but I have one question where did you get your rails?


these are my carriages, look familiar lol trying to source the rail. Looking at yours I think I have the baby version (20mm rail)

Thanks. They look to be Bosch or Rosa. I can put you in touch with my supplier, he deals in 2nd hand stuff and may be able to source for you. Let me know.

[Chaz]

Managed to get access to a bridgeport type machine to do work on the Z Axis. Almost done, need to do a fair bit of tapping and will then assemble.