Thor, or should that be Zeus?

[Desertboy]

Ok, cleaned up a bit, removed the reference table, mounted the main table and did a quick test fit of the Z Axis bottom part.

The naked machine


Some bits on it



Z axis, ballscrew is just 'hanging' onto the overhang, not mounted. The Z axis needs some of the holes to be drilled all the way through and I need to find the location of the bottom carts. I did not have the measurement at hand when I machined the holes on the larger mill. As these are not threaded, I have a bit of margin for error.

I have to say I think your 3d printer might be a bit over engineered ;)

That is a work of art ;)