Thor, or should that be Zeus?

[Clive S]

I had tried a cable and had cut / moved the wires manually. I should just order one of each and test again.

Chaz do you have the cable diagram for it. RS232 receive & transmit are on pins 2 & 3 sometimes they have to be reversed. Ground (if I remember) is on pin 7 on a DB25 plug and pin 5 on a DB9 plug

[Chaz]

Chaz do you have the cable diagram for it. RS232 receive & transmit are on pins 2 & 3 sometimes they have to be reversed. Ground (if I remember) is on pin 7 on a DB25 plug and pin 5 on a DB9 plug

So what I've done is order a new F / M straight cable. The Kinco drive manual shows as default 2-2 3-3 and 7-7 wiring. Will try that first. Struggling to find (on Amazon) and null modem M / F cable in case.

Problem Ive had is that on my Panasonic drives that use Serial / proprietary, Ive also struggled to get it working.

[AndrewMawson]

I have a stack of about half a dozen HP DC7600 small form factor PC's that will shortly be going to the tip - you are welcome to all or any if you wish FOC. They have RS232 ports and multiple USB's - all have had their hard disks removed for security reasons - they are ex-corporate machines.

(the clear out continues !)

[Chaz]

I have a stack of about half a dozen HP DC7600 small form factor PC's that will shortly be going to the tip - you are welcome to all or any if you wish FOC. They have RS232 ports and multiple USB's - all have had their hard disks removed for security reasons - they are ex-corporate machines.

(the clear out continues !)

Please. I wouldnt find 2 for using as basic PCs / Mach 3 / Serial device machines. Ill make a plan to collect from you or similar.

[Zeeflyboy]

sweet jebus Chaz, don't do things by halves do you!

great work, look forward to seeing this thing in action

[Chaz]

sweet jebus Chaz, don't do things by halves do you!

great work, look forward to seeing this thing in action

Thanks, nothing like your workmanship however. Perhaps Thor can build some pretty parts.