Thor, or should that be Zeus?

[Desertboy]

Bad luck Chaz

However I do seem to remember posting this about a week ago (post #283)

"However my personal preference on big powerful machines is to have the home switches inside the boundries set by the limit switches, and have the limit switches trigger powering off of the drives. Also to have the limit switches within the boundries of mechanical stops that limit travel before ball screws over travel."

Hi Andrew, would a latched relay be suitable to perform the functions you describe?

[Chaz]

Hi Andrew, would a latched relay be suitable to perform the functions you describe?

Andrew, yes, point made. I thought of the same.

Desertboy, fairly easily done with the CS Labs. It has sub 100ms error checking and can instantly disable the servos in a fault / trip condition.

[AndrewMawson]

I think the main point is to have a physical limit to save the ball screws if there is a runaway - preferably with a hard neoprene or other suitable plastic buffer.

As for the latched relay then yes that's the easy way to do it, but it needs to be a fast acting relay.

[Chaz]

Suppose this means it works.



Speeds and Feeds

24000 rpm - 6mm endmill
Cutting Rate 4000mm/min
Lead / Ramp at 1440 mm/min

This was run at 80% speed. Overall happy with the cut considering there is no finish pass.

DOC is 5mm, WOC is 1.2mm

Still got more to do, but happy with the initial results.

[AndrewMawson]

Excellent - congratulations !

BTW do you still want those Compac PC's ?

[Chaz]

Excellent - congratulations !

BTW do you still want those Compac PC's ?

Please, ill make a plan to come and collect. Dont chuck them please.

[Robin Hewitt]

I haven't felt any disturbance in the force yet, I think you need to up the ante.
Milling cutters start to perform around 3/4" diameter and up, anything less than that is squidgy

[Chaz]

Excellent - congratulations !

BTW do you still want those Compac PC's ?

How big are they? Trying to work out if they will fit in my bikes top box, thanks

[AndrewMawson]

If your top box is built like Thor then possibly !!

They are 340 mm x 380 mm x 100 mm and I think that there are six of seven of them