i run a heavy load 380v 4kw hydrovane off one- at 50hz. 3 second start up- coast to stop (doesnt like to try to slow down a hydrovane- as they stop near instant when power comes off . it draws just over 30 amp to start it - but drops to 6.9 running it. - so at 380v 50hz they perform well. at 220v i doubt the motor would start at all .
every machine in my workshop is industrial- and they all run off seperate vfds .
if anyone buys the ecogoo 9100 and needs to run modbus- i wrote instructions as they are non existant in the manual!