. .
  1. #1
    We are getting serious chipping issues on Melamine faced chipboard and Melamine faced MDF.
    What type of bits should we use at what speeds? Its for cutting only 5mm into an 18mm boardClick image for larger version. 

Name:	DSC_0082.jpg 
Views:	531 
Size:	104.9 KB 
ID:	17770

  2. #2
    You want Spiral flute Down cut like these. http://www.wealdentool.com/acatalog/...n_Cut_228.html

    Speeds and feeds will depend on your machine and dust extraction capabilty's but any wheere between 18000-24000rpm and 5000 -10000mm/min. This will mostly depend on your machine spindle and strength and to some degree how good your dust extraction is. Down shear cutters require good extraction because they can clog the slot and overheat.

    If cutting thru Melamine then you'll want Compression bits which have Up & Down cut.

  3. #3
    Bits ordered. Thanks, that's awesome!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Feeds and speeds software?
    By Leadhead in forum Computer Software
    Replies: 9
    Last Post: 31-10-2015, 09:34 PM
  2. Plunging and ramping speeds
    By gavztheouch in forum Machine Discussion
    Replies: 3
    Last Post: 15-06-2014, 12:49 PM
  3. Feeds and speeds
    By dudz in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 26-08-2013, 11:42 AM
  4. Not getting speeds I thought I would?
    By jonbabbz in forum General Discussion
    Replies: 5
    Last Post: 29-09-2012, 09:56 PM
  5. Speeds and Feeds
    By Web Goblin in forum Tool & Tooling Technology
    Replies: 0
    Last Post: 20-09-2012, 01:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •