Quote Originally Posted by Ger21 View Post
I'm building a 4x8 machine and using AC servos, and I'm using steppers and Leadshine AM882 drives for the Z axis (two, it's a dual Z machine) to save money.

I would think that a 5mm pitch ballscrew and a 600oz stepper would be OK for your machine? That's just a guess, though.

As for $400 servos. I've seen 400W servos on AliExpress for around $400, but not larger ones. And at that price, you may not know exactly what you're getting. I'm paying around $575 for 400w Leadshine motors and drives for my machine. 750W and 1Kw are closer to $800 a set. The price difference between 750W and 1Kw is very small, so I'd definitely go with larger ones for a little more money. http://americanmotiontech.com/motor-...tage-ac-input/

As for vacuum, you can never have enough. We have two 10HP Becker's on our Morbidelli with a 5x12 table, and could always use a bit more.
Gerry do you have a forum for your build? I tried to do a search and didnt come up with anything.

The vacuum does worry me, I may have to add more or sell these I have an get a single larger unit... But we will see I think for now I will be able to work around the vacuum pumps that I have and see how things are.

Our friend Fred from BST Automation has 1kw servo motor + drive for 332euro +shipping which will cost you in total~400$ for the combo when you buy 4.


I am not sure you need exactly 1kw if you go with rotating ball nut. But as prices are similar. I think you will need 0.75kw geared like mine 20t:30t and that will give you speed of 20000mm/min on the long axis/ball screw with rotating nut/.
Ok I had came those on ali but like Gerry said I had no idea what I was looking at or what I would be getting. So having someone point them out is very helpful. For the cables, do you just make up longer cables or order specific lengths? 3m wont make it for the far side X motor. How have you found the shipping to be? I see it says 23 days... I wonder if thats pretty accurate or if they come faster than that.

The other motors/drives I came across was dynamic motor motion technology.

I need to dig deeper into your build Boyan and see how to built those ballnut drives. I found a few options online and on the forum here for how to build them.

Have your guys seen these
http://www.stober.com/motion_control/EZM_series/

I havent priced them and I know they cant be geared so that has to be taken into account but seems like a great way to run the ballnut.

I hope to have a plan here in the next couple days then I can run it by you all for advice before ordering everything up...