Made some good progress on the machine, I am to the point of wanting to run a gcode program, although there is alot to do before I can actually cut.

I loaded a sample Gcode program just to see all 3 axes move together

I moved the machine 12 inches away from X and Y and put my Z in the middle of travel and zeroed the DRO's for work start. When I hit cycle start (with my hand firmly on the e-stop...) I get a message "Move off limits before cycle start". I then checked the I/O window in CSMIO config and no limit switches are tripped. I tried a few other things within mach with no luck. I then turned off all limits (except e-stop) and I get the same message. Did some searching/reading on forums and didnt come across anything.

Anyone have any thoughts on what this could be? I hope its something simple that I just havent turned on/off?

I plan to a write up on the progress, just this issue has me frustrated so thought I would ask.

Thanks