Quote Originally Posted by eurikain View Post
Yes that's what I had done. PC GND to +5V of the 5V PSU, and PC +5V to +5V of the 5VPSU.

Can you provide a quick diagram on how to do what you're explaining ?

I trust you mean PC GND to -5v on the power supply.

On your power supply check with your meter for continuity between -5v and the earth terminal. It should not be connected internally in the power supply. If it is you will have a ground loop. These power supplies are generally not connected between the -5v terminal and the Earth terminal. Also make sure that if you use the 5v power supply that -5v is connected to PC GND on the BoB and nowhere else (I am assuming that you do not have any other requirements for 5v in your control box).

The Earth connection on the power supply should be connected to the star earthing point to provide shielding for the power supply.

In a conversation with Graeme, he thought that the power supply, if under loaded, may react badly to interference from the VFD and cause all manner of effects, in fact it could go unstable by itself. So even if you get the earth and current return paths right, you may still have problems as you are only driving the optos on the BoB.

Jazz hit on a solution, and the PC USB supplying 5v to the BoB is workable, but I do not like using USB ports to provide power as they have limitations.

If it is working now don't muck about with it, but I still don't believe that we have got to the root cause of the problem.

Cheers,
Rob