Hybrid View
-
10-07-2009 #1
Hi HankMcSpank
The prices are shown in the catalogue, this can be down loaded form there website It is 43.5MB in size, in pdf format, or you can request a printed copy of HPC Gears catalogue to be sent by post FREE of charge.
Ivan.
-
11-07-2009 #2
Wow Clanzer, what a involved bit of engineering - that must have taken you a fair while to knock up?
I'm almost embarassed by the '14 old' kludger effort that I've thrown together! (in my defence, I need something in place quick guv)
I'll get a vid posted up of my winder erhmm ...winding, when I get a chance. This was the outcome of its 'first wind' two nights ago...
Note: the acrylic bobbin th copper has been wound onto was homemade using scrap bits of perspex on my homemade CNC - pretty much my 'proof of concept' first attempt! It's a bit austere looking & it looks a little lopsided too! (a littl higher on the right!)
The winder itself still needs a little bit of 'tweaking' (for one, the helix M8 threaded rod pushed over the traversal stepper's shaft is somewhat 'out of true' as I don't have a lathe yet to bore/drill out the centre of the nylon M8 threaded rod!)Last edited by HankMcSpank; 11-07-2009 at 11:08 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
misaligned keyway - stepper shaft vs pulley
By dsc in forum Stepper & Servo MotorsReplies: 9Last Post: 25-02-2014, 03:25 PM -
pulley ratios on 3 pulley axis
By Swarfing in forum Belt Drive, Pulleys & TimingReplies: 35Last Post: 21-07-2011, 12:43 AM -
Stepper shaft size and pulley bore size problem
By psiron in forum Linear & Rotary MotionReplies: 13Last Post: 15-06-2010, 04:11 PM -
Step 4 router
By John S in forum Milling Machines, Builds & ConversionsReplies: 9Last Post: 11-08-2009, 04:16 PM -
Step clamp
By Lee Roberts in forum Programmers CornerReplies: 0Last Post: 14-10-2008, 02:39 AM
Bookmarks