Z drive not working on cnc plasma

[whensparksfly]

Sorry the z axis wiring and board won't drive any of the other motors.but I did check the z motor and it works fine using the x axis wiring

Sent from my SM-G361F using Tapatalk

[lucan07]

If the Z Motor worked on X axis then the X motor should have worked on the Z axis so either driver, wiring or Config is the problem.

[whensparksfly]

Here are motor output, input signals and output and port setup signals

Sent from my SM-G361F using Tapatalk

[whensparksfly]

I just for it to work the wire from the out puts were in the completely wrong place.just need to fix the driver output for the plasma now

Sent from my SM-G361F using Tapatalk

[lucan07]

So Z axis now working ok?

[whensparksfly]

Yes he had it fitted to pin 1 and 2 it was ment to be in 6 and 7

Sent from my SM-G361F using Tapatalk