. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 16-03-2016 #20
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Several ways to do this and my way would be just like gerry's with operation just on that area before doing the final finish pass. Cam software makes how easy or hard this is to do but if you Cam program that is restrictive then it's easy enough to draw in geometry soley for the purpose of Caming the part.

    Like said before it's just knowing the Cam software and thinking a little differently to how Cam program might want to do it.
    Last edited by JAZZCNC; 16-03-2016 at 03:40 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Beginner Moving Gantry Build? Read This!
    By Tenson in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 23-05-2018, 05:30 PM
  2. Garage CNC - A gantry style machine design
    By fandango in forum Gantry/Router Machines & Building
    Replies: 14
    Last Post: 21-03-2014, 01:38 AM
  3. Truss style Gantry
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 28
    Last Post: 15-12-2012, 07:23 PM
  4. A few questions to start a DIY mini CNC
    By purple_rob in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 03-08-2009, 11:08 PM
  5. Vertical moving gantry????
    By Ross77 in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 03-06-2009, 08:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules