-
17-03-2016 #31
When running Mach3 without the parallel port driver installed, a lot of things don't work correctly.
Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
17-03-2016 #32
That explains it then, thanks.
-
17-03-2016 #33
Dave do your self a Favor and Buy Gerry's (Ger21) Screen set and make touch plate. Worth every penny and will save you hours of messing around with setting Z height etc. Much much nicer than 1024 screen set.
You'll find link at bottom Gerry's post.
-
17-03-2016 #34
Done, looks very nice indeed.
Do you get commission ;)
Thanks
-
17-03-2016 #35
-
17-03-2016 #36
Some good people on here, no two ways about it
-
17-03-2016 #37
-
17-03-2016 #38
Been using it for ages as well and it's well worth it.
The probe function page is great with everything you can think of.
Just watch your monitor size - mine is 15" and the fonts can be a bit fuzzy. This is explained in the link and there is a preferred monitor/resolution size if I remember correctly. Even fuzzy it's still a good screenset.
-
17-03-2016 #39
Turn off Auto screen enlarge and they won't be fuzzy. I use an old 15" monitor myself.
Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
18-03-2016 #40
Arrived last night, looks money well spent, nice one.
Day off today, out in the shop, get the thing going :)
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
Beginner Moving Gantry Build? Read This!
By Tenson in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 23-05-2018, 05:30 PM -
Garage CNC - A gantry style machine design
By fandango in forum Gantry/Router Machines & BuildingReplies: 14Last Post: 21-03-2014, 01:38 AM -
Truss style Gantry
By D.C. in forum Gantry/Router Machines & BuildingReplies: 28Last Post: 15-12-2012, 07:23 PM -
A few questions to start a DIY mini CNC
By purple_rob in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 03-08-2009, 11:08 PM -
Vertical moving gantry????
By Ross77 in forum Gantry/Router Machines & BuildingReplies: 9Last Post: 03-06-2009, 08:34 PM
Bookmarks