Threaded View
-
31-03-2016 #11
Last Activity: 20-12-2024
All is not lost ;)
Just had a reply from the supplier - that's what i call customer service!
Hidden away under a little plastic cover is a lever - pull it and it disconnects the internal EMC filters, he thought it worth a try. Popped out to shop, pulled the thingy and plugged it in - hey presto it powered up :)
Sounds like the same setup as Boyan mentioned above.
Didn't have time to run the PC up or start the spindle but at least the breaker didn't blow. I unplugged it, waited a minute and tried again and it worked ok again.
It's a promising note to end the day on at least.
Also have the new 5mm cutters - brilliant service from CutWell Ltd. Now I just need time, it's in short supply at the moment;)Last edited by Davek0974; 31-03-2016 at 08:15 PM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
Beginner Moving Gantry Build? Read This!
By Tenson in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 23-05-2018, 05:30 PM -
Garage CNC - A gantry style machine design
By fandango in forum Gantry/Router Machines & BuildingReplies: 14Last Post: 21-03-2014, 01:38 AM -
Truss style Gantry
By D.C. in forum Gantry/Router Machines & BuildingReplies: 28Last Post: 15-12-2012, 07:23 PM -
A few questions to start a DIY mini CNC
By purple_rob in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 03-08-2009, 11:08 PM -
Vertical moving gantry????
By Ross77 in forum Gantry/Router Machines & BuildingReplies: 9Last Post: 03-06-2009, 08:34 PM
Bookmarks