. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-04-2016 #11
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by lucan07 View Post
    Now you tell me good job I like apples just brought a 2.2kw HY VFD and spindle but at £146 delivered from UK with the eBay codes yesterday i don't think I would have got near the Scheider
    Don't threat I fit these all the time and think Dave had VFD which wasn't setup correctly or possibly faulty. Normally they work very well above 6000rpm.

    Yes the Huanyang won't match Vector drives for torque, esp at low rpm but it's more than good enough for cutting wood an aluminium between 8000-24000rpm with smaller cutters which is where you'll mostly run it.
    Last edited by JAZZCNC; 01-04-2016 at 09:01 PM.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Similar Threads

  1. Beginner Moving Gantry Build? Read This!
    By Tenson in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 23-05-2018, 05:30 PM
  2. Garage CNC - A gantry style machine design
    By fandango in forum Gantry/Router Machines & Building
    Replies: 14
    Last Post: 21-03-2014, 01:38 AM
  3. Truss style Gantry
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 28
    Last Post: 15-12-2012, 07:23 PM
  4. A few questions to start a DIY mini CNC
    By purple_rob in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 03-08-2009, 11:08 PM
  5. Vertical moving gantry????
    By Ross77 in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 03-06-2009, 08:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules