Threaded View
-
13-04-2016 #13
Last Activity: 24-07-2022
On my website, there are some modified macros that will zero the Z axis for all of the G54-G59 offsets at once, regardless of which one you are currently in.
As for material thickness, there's another option in the 2010 Screenset called "Material Offset". When checked, you zero the Z axis to the table, and Z zero is set at the material thickness value above the table. It's works basically the same as setting Z zero to the bottom of your material. If you are doing pockets, note that this will affect the pocket depth if the material thickness varies.Last edited by Ger21; 13-04-2016 at 08:09 PM.
Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
The Following User Says Thank You to Ger21 For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Beginner Moving Gantry Build? Read This!
By Tenson in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 23-05-2018, 05:30 PM -
Garage CNC - A gantry style machine design
By fandango in forum Gantry/Router Machines & BuildingReplies: 14Last Post: 21-03-2014, 01:38 AM -
Truss style Gantry
By D.C. in forum Gantry/Router Machines & BuildingReplies: 28Last Post: 15-12-2012, 07:23 PM -
A few questions to start a DIY mini CNC
By purple_rob in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 03-08-2009, 11:08 PM -
Vertical moving gantry????
By Ross77 in forum Gantry/Router Machines & BuildingReplies: 9Last Post: 03-06-2009, 08:34 PM
Bookmarks