Threaded View
-
15-04-2016 #11
Last Activity: 20-12-2024
From Les at Sheet-Cam:- you have to add the M05 as well because the post does not know what you want to insert so it treats it as text.
Now it looks like this...
N24330 G03 X103.6816 Y37.4323 Z-5.2000 I0.0000 J-1.2800
N24340 (Operation: Insert code snippet Code: Wait For Clamping Change)
N24350 G00 Z20.0000
N24355 M05 (Stop Spindle)
N24360 M883 (Go to park position)
N24370 M0 (Change The Clamps Now)
N24380 (Operation: Inside Offset, Part To Cut Last, T4: 5.0mm Carbide 1 Flute YG, 5.2 mm Deep)
N24390 S18000 M05
N24400 (5.0mm Carbide 1 Flute YG)
N24410 T4 M06
N24420 G43 H4
Seems like that will workLast edited by Davek0974; 15-04-2016 at 11:59 AM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Beginner Moving Gantry Build? Read This!
By Tenson in forum Gantry/Router Machines & BuildingReplies: 3Last Post: 23-05-2018, 05:30 PM -
Garage CNC - A gantry style machine design
By fandango in forum Gantry/Router Machines & BuildingReplies: 14Last Post: 21-03-2014, 01:38 AM -
Truss style Gantry
By D.C. in forum Gantry/Router Machines & BuildingReplies: 28Last Post: 15-12-2012, 07:23 PM -
A few questions to start a DIY mini CNC
By purple_rob in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 03-08-2009, 11:08 PM -
Vertical moving gantry????
By Ross77 in forum Gantry/Router Machines & BuildingReplies: 9Last Post: 03-06-2009, 08:34 PM
Bookmarks