adding engraving plug in

[cropwell]

I have made some molds and would like to be able to engrave my name on the front and what the molds is.
but on my copy of mach3 in the wizards I do not have the engrave one.

Mine has one at the bottom of the Wizards list - called 'Write'. If you haven't got it you could try downloading it and re-installing.

[kell]

Tnks guys found the write at the bottom, just need a good tutorial now

[John S]

Here you go.

http://www.stevenson-engineers.co.uk/files/write.pdf

[JoeHarris]

Here you go.

http://www.stevenson-engineers.co.uk/files/write.pdf

Well well well. Fancy seeing that packet of hobnobs again! Hi John

[JAZZCNC]

Well well well. Fancy seeing that packet of hobnobs again! Hi John

Ye and it's same packet because the Tight Old B''##rd won't part with them. .

[Clive S]

Ye and it's same packet because the Tight Old B''##rd won't part with them. .

I know another one like that

[JAZZCNC]

I know another one like that

Well didn't like to say that about you Clive but seen has you've come out the closest I'll agree 100%. .