Thread: CNC Vinyl Cutting
Threaded View
-
24-03-2016 #11
He asked about film for airbrushing and that's more or less what I used the aslan for. I redid all the transfers on some push bike
frames and forks I was painting with paint; why spend 30 quid on a set of custom printed stickers when you can spend a week with
an air brush and doing the same thing;-) The use of these films seems to be for big lettering, I have done letters down to slightly less than 2mm high!
I have a ElCheapo Chinese vinyl cutter, seems to do the job pretty well.
I will attach some pics if your interested.Last edited by graffian; 24-03-2016 at 08:02 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Walnut Vinyl Wrap - Good one?
By Tenson in forum General DiscussionReplies: 10Last Post: 29-12-2014, 02:53 PM -
Cutting Ply/MDF
By Leadhead in forum Wood Finishing Tips & TricksReplies: 3Last Post: 02-10-2013, 01:59 PM -
Cutting Fluid
By Web Goblin in forum Swarf & Chip ManagementReplies: 4Last Post: 12-01-2013, 09:31 PM -
The cutting fun begins
By m.marino in forum Machine DiscussionReplies: 2Last Post: 01-04-2012, 12:35 AM -
Test of new vinyl cutter
By evildrome in forum Tool & Tooling TechnologyReplies: 0Last Post: 17-01-2011, 12:25 AM
Bookmarks