Jobs ruined after long run

[BernieNUFC]

3D Finish.zip

Hi Jazzcnc
Thats a very comprehensive reply and very thorough thank you, i will start doing the checks you mention, in the mean time i have attached the NC file.
The machine has probably done less than 50 hours since new so i dont think there should be any parts that are ready to fail just yet, well there better not be.....:-)
I am using WinPC-NC and the settings defaulted for the 720 so i am not sure where to start checking micro stepping.
No loose connections as i have just relocated it and made everything a much better and tighter setup.

Thanks again
Bernie