. .

Thread: Tool Changing

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 23-03-2016 #5
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by komatias View Post
    I have had this when playing with some preinstalled tools in a CAM program.

    you will need to look through your gcode for the tool length offset call G43 H~ and delete it.
    Should only apply the offset if one is set in the tool table. So for instance if calls G43 H1 Z 5 and the #1 offset in tool table is Zero nothing is applied so makes no difference if G43 is there or not.
    Last edited by JAZZCNC; 23-03-2016 at 12:09 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need guidance on manual tool changing best practice (and other things)
    By Noplace in forum Machine Discussion
    Replies: 2
    Last Post: 07-12-2015, 11:03 AM
  2. Spindle tool changing.
    By D-man in forum Tool & Tooling Technology
    Replies: 12
    Last Post: 02-09-2014, 09:36 AM
  3. DXF with tool offset
    By Cube3 in forum CAD & CAM Software
    Replies: 4
    Last Post: 25-03-2014, 10:54 PM
  4. Changing folder permissions
    By motoxy in forum Computer Software
    Replies: 7
    Last Post: 04-02-2012, 11:28 PM
  5. What tool would you use for this?
    By Kai in forum Tool & Tooling Technology
    Replies: 1
    Last Post: 21-03-2011, 06:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules