. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 29-03-2016 #26
    Davek0974's Avatar
    Lives in Bishops stortford, United Kingdom.
    Davek0974
    Last Activity: 20-12-2024 Has been a member for 9-10 years. Has a total post count of 1,165. Received thanks 78 times, giving thanks to others 226 times.
    I had a mail back from CNC4YOU today, they supplied the BOB but not the VFD - I presumed my VFD was identical as they are both (supposedly) the standard Huyanyang 2.2kw items.

    Their tests revealed that voltage should definitely be measurable when the BOB is connected to the VFD, they even loaded it up a little with a 4k7 resistor and still got the 0-10v ok.

    So this issue points to my VFD being a bit iffy - it came from the usual guy on Aliexpress with all my other bits.

    Most odd, hopefully it won't damage my BOB?
    Last edited by Davek0974; 29-03-2016 at 01:06 PM.
    https://ddmetalproducts.co.uk
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stepper motor Pulse Signal Generator module
    By Tom J in forum Motor Drivers & Controllers
    Replies: 8
    Last Post: 12-01-2016, 11:47 AM
  2. AM882 Alarm and Enable Signal Question
    By Gotty101 in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 24-11-2015, 11:07 PM
  3. Need to slow down a signal due to Safe Torque Off alarm
    By corkcnc in forum General Electronics
    Replies: 0
    Last Post: 04-06-2014, 11:35 PM
  4. Encoder Signal to PC
    By antsals in forum General Electronics
    Replies: 6
    Last Post: 26-04-2011, 10:49 AM
  5. +5V TTL Signal
    By NC-Joey in forum General Electronics
    Replies: 2
    Last Post: 12-08-2007, 02:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules