garage clearout ali extrusion, linear rails, ballscrews

[komatias]

I am only allowed to post 18 pictures per reply so here is the remainder of the listing:

Next we have the ballscrews various lengths withthe longest one being in excess of 900mm, maybe 1m long. All have been machinedby a friend on a hobby lather but I would not trust them, thinking back to howthey we done.
Oneskinny one was bought from machined from Misumi 12mm diameter has not been usedas it was too loose for my liking.
The restwere from Zapp automation 1605s, I also added oversized balls to some of theballnuts so they are pretty tight. Packet of various oversized balls will gowith them if the buyer wants it.

I will need to make better measurements for these as I am not sure what is what. Either way, I am happy to let them all go for £80 plus postage.




This is where my heart starts to bleed... my collection of linear rails...

3 sets of Hiwin 20mm profile rails with 12 flange type carriages. The carriages are the medium preload high precision type. Cost me more than £800 to buy at the time including the two FK12-C7 ballscrew mounts. Were destined to go on my Chester lux when I decided to buy the KRV.

Carriages HGW20CC-ZA £25 each ,
1m long rails £40 each
700mm long rails £35
500mm long rails £28 each
FK12-C7 ballscrew mounts £40 each
Buy the lot for £500 saving you £80is






Even more heart bleed comes from having to sellmy unopened 25mm NSK rails paid for in full to mate who bought them in errorfrom RS. 13 heavy duty carriages included.
Total cost at the time was in excess of £1500...

£55 eachfor the 820mm long rails
£50 eachfor the 640mm long rails
£40 eachfor the carriages
£700 (thelot saving you £30)